IBM GC22-7004-14 370 Installation Manual Physical Planning Jun85 free download

File name GC22-7004-14_370_Installation_Manual_Physical_Planning_Jun85.pdf

--- - - - - --- ---- -- -- - - -_ . - -- - ----- IBM System/370 Installation Manual-Physical Planning Publication Number File Number GC22-7004-14 S370-15 Federal Communications Commission (FCC) Statement Warning: This equipment generates, uses, and can radiate For machines manufactured before January 1, 1981, the radio frequency energy and if not installed and used in FCC does not require compliance. To detennine the exact accordance with the instructions manual, may cause inter- category of your machine, refer to the label attached to the ference to radio communications. It has been tested and machine. found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, CAUTION which are designed to provide reasonable protection against The power attachment cable plug (when supplied) is such interference when operated in a commercial environ- approved for use with the particular machines and meets ment. Operation of this equipment in a residential area is the relevant testing laboratory or country/test-house likely to cause interference in which case the user at his standards. For the user's safety, the plug must be con- own expense will be required to take whatever measures nected to a properly wired and grounded receptacle. may be required to correct the interference. An improperly wired receptacle could place a hazard- ous voltage on accessible metal parts of the machine. The preceding statement applies to equipment covered by The customer is responsible for receptacle wiring. this Installation Manual-Physical Planning (IM-PP). This equipment has been tested and found to comply with the limits for a Class A computing device as described. Fifteenth Edition (June 1985) This major revision obsoletes GC22-7004-13 and the following Technical News- letters: GN22-2097 GN22-2098 GN22-2099 This edition deletes Section 1 of this manual and adds miscellaneous information and changes. The deleted material from this manual is now in IBM General Information Manual Installation Manual-Physical Planning, GC22-7072. Changes or additions to the text or to an illustration are indicated by a vertical line to the left of the change. Changes are made periodically to the information herein; before using this pub- lication in connection with the installation and operation of IBM equipment, refer to the latest IBM System/370 and 4300 Processors Bibliography, GC20-0001, for the editions that are applicable and current. References in thi